Temperature-responsive culture surfaces for insect cell sheets to fabricate a bioactuator

ABSTRACT

For the first time, we have fabricated insect-derived cell sheets by using temperature-responsive culture surfaces having a phase-transition temperature below 25°C. We prepared the temperature-responsive cell culture surfaces (tissue culture polystyrene, TCPS) by grafting a copolymeric gel consisting of hydrophobic N-tert-butylacrylamide (tBAAm) and N-isopropylacrylamide (IPAAm) units. First, to characterize the hydrophilic and hydrophobic properties of the copolymeric gel-grafted surfaces, static water contact angles of each surface were measured at various temperatures. By increasing the amount of tBAAm in the grafted copolymeric gel, the transition temperature of the gel was shifted to lower temperatures. At 25°C, the grafted copolymeric gel was dehydrated, and the insect-derived cells (AeAl2 cells) adhered on all the copolymeric gel-grafted surfaces. At 20°C, AeAl2 cells cannot adhere on the P(IPAAm-1.62tBAAm)-TCPS surface (the initial molar ratio of IPAAm and tBAAm (tBAAm?=?1.62 mol%)) better than on other surfaces (TCPS and tBAAm?=?4.88, 8.17 mol%). These two findings implied that the lower critical solution temperature of the copolymeric gel-grafted-TCPS existed from 20°C to 25°C. The laminin-coated P(IPAAm-1.62tBAAm)-TCPS surface showed temperature-dependent cell attachment and detachment properties, while AeAl2 cells were not detached from the extracellular matrix uncoated P(IPAAm-1.62tBAAm)-TCPS surface. AeAl2 cells and insect muscle cells were harvested as the respective sheets.     

Effect of expander shape on cooling characteristics by using a model pulse tube refrigerator

Pulse tube refrigerators do not have moving parts in the cold section, and they have low vibration, high reliability, and long life. The expander in refrigerators typically has an inverted U or coaxial shape because this attains a wider absorber area, lower height, and compactness. However, the performance of a Stirling-type pulse tube refrigerator is inferior to that of a Stirling refrigerator. Cooling characteristics of the pulse tube refrigerator greatly depend on the shape of the expander. In this study, an inertance-type refrigerator, which uses ambient air for the working gas, was developed to examine the effect of expander shape. This refrigerator model with changeable expander operated with a Stirling cycle, and it was composed of a reciprocating compressor, after-cooler, regenerator, absorber, pulse tube, hot-end, and inertance tube with reservoir. The following expander shapes were tested: in-line, L shape, L-L shape, and coaxial shape. The effect of expander shape on cooling capacity was examined experimentally and numerically using the model pulse tube refrigerator. The results of experiments showed that the L shape expander had the highest performance and the coaxial expander had the lowest performance. In addition, the characteristics of the gas flow in each expander were confirmed by fluid dynamics analysis.     

1100 kV气体绝缘双断口断路器的开发与产品化

开发了一种用于气体绝缘组合电器(GIS)的1100kV50kASF6气体双断口断路器(GCB)。研究了这种断路器的各种特性,并成功完成了在绝缘、开断和机械性能等方面的型式试验。实现了GCB的小型化和轻量化。这种新开发的GCB已应用在中国特高压交流示范工程的GIS中,并已于2009年年初投入使用。     

THIRD PHASE FORMATION IN NITRIC ACID EXTRACTION BYn-OCTYL(PHENYL)-N,N-DIISOBUTYLCARBAMOYL-METHYLPHOSPHINE OXIDE

ABSTRACT

The third phase formation was studied as a function of n-octyl(phenyl)-N, N-diisobutylcarbamoylmethylphosphine oxide (CMPO) and tri-M-butyl phosphate (TBP) concentrations and temperature in the extraction of nitric acid. The concentration fractions of CMPO and TBP in the second and the third phases were determined by gas chromatography. Both CMPO and TBP were found to be enriched in the third phase. The concentrations of nitric acid in the second and the third phases relatively agreed with the calculated concentrations based on the extraction equilibrium constants of nitric acid by CMPO and TBP. The extraction of Np with the third phase formation was also discussed.     

Remarkable improvement in emission efficiency of ZnCdSe/Zn(S)Se LEDs by thermal annealing

Thermal annealing effects on optical and electrical characteristics for p-type and n-type II–VI compound layers (ZnSe, ZnSSe, and MgZnSSe) and on the emission efficiency of ZnCdSe/Zn(S)Se 6 quantum well (QW) light emitting diodes (LEDs) grown by molecular beam epitaxy were investigated. It was clarified that serious degradation of optical and electrical characteristics was not observed up to an annealing temperature of 400°C. In the case of p-MgZnSSe, the maximum permitted annealing temperature was lower than that of Zn(S)Se. The light output of the ZnCdSe/Zn(S)Se multi QW LEDs was enhanced by a factor of three at optimum thermal annealing conditions. The study suggests that this thermal effect for LEDs was produced by the improved crystal quality of ZnCdSe QWs by thermal annealing.     

Geranial: the alarm pheromone in the nymphal stage of the oribatid mite,Nothrus palustris

The presence of an alarm pheromone was demonstrated in the deutonymphal stage of the oribatid mite, Nothrus palustris (C. L. Koch). The active principle was identified as 3,7-dimethyl-(E)-2,6-octadienal, geranial, and was shown to be active at doses of 10–100 ng. This is the first such pheromone identified in oribatid mites.     

Cleaning of materials contaminated with metal oxides through supercritical fluid extraction with CO2 containing TBP

Studied was an application of supercritical fluid extraction (SFE) to cleaning of the materials contaminated with metal oxides. By using supercritical CO₂ including chemical complexes of tri-n-buthylphosphate (TBP) and HNO₃, lanthanide was recovered from oxide mixtures placed in a pressure vessel. The lanthanide oxide was dissolved with TBP-HNO₃ and extracted with TBP in supercritical CO₂. This cleaning method reduces volume amount of liquid waste arising from treatment of the contaminated materials. Being applied to a mixture of Gd₂O₃ and SrO, we found that Gd was selectively recovered and Sr was not found in the recovered solution. Gd was also selectively recoverd when a mixture of Gd₂O₃ and ZrO₂ was treated. This selective nature of decontamination is an additional advantage of the SFE with TBP-HNO₃ complex. This method would be applicable to the selective cleaning of materials contamined with radioactive oxides such as UO₂/PuO₂.     

Efficient intraliposomal entrapment of hydrophilic platinum oligonuclear complexes

A simple method for intraliposomal entrapment of platinum complexes is presented, where hydrophilic platinum oligonuclear complexes, 1-methyluracil green (MeUG), uridine green (UdG) and uridine blue (UdB), are included inside liposomes and allowed to react with bilayer lipids. The liposomes prepared in this method exhibit higher entrapment efficiency and higher distribution to organs (liver, kidney, spleen, lung) and blood (but not B16 cancer cells) than those prepared from mononuclear Pt complexes [cis-diamminedichloroplatinum, cis-diammine-1,1′-dicarboxylatocyclobutaneplatinum, and cis-dichloro-cis-dihydroxy-trans-bis(isopropylamine)platinum)].